Chemours

Chemours Freon MO29ISCEON MO29 is a cost effective HFC refrigerant, a non-ozone-controlling coolant / temperature (ODP = 0), used to replace R22 in medium temperature, in direct expansion applications (DX), (also applicable for low temperatures) including Commercial supermarket systems, air-conditioning applications, including DX water coolers.Used For Applications:Commercial coolers Medium temperature and industrial cooling DX (can also be used for low temperatures):Food serviceRefrigerated display in SupermarketStorage and food processingIce machineAC Housing and commercialIt is the best choice for DX water cooling applicationsBenefits MO29:Provides refrigerant retrofit that is efficient, cost-effective and easier to use compared to R-404A, R-507, and R-407CHFC that does not damage ozoneIn most cases there is no need to change the type of lubricant as long as the lubricant used is compatible with traditional and new lubricantsField testing has been successfully done on many systems without TXV adjustments, but in the case of superheat changes may be required.A TXV loading assessment is required to determine whether a TXV change is requiredEquipment / unit does not need to be replacedHas a GlobalWarming Potential value (GWP) 30% lower compared to R-404A and R-507After the retrofit process, ISCEON MO29 can be added without having to drain the entire coolerRecommended using mineral lubricant (MO), alkylbenzene (AB) and polyol ester (POE), in most cases no lubricant type change required during retrofit is performed.

Chemours Freon MO59Chemours Freon MO59 is HFC retrofit with cost effective and does not damage the ozone, is used to meretrofit the tool using R22, e.g.ial, including food service, supermarket refrigerated Displays, storage and food processing. Benefits: Efficient, cost-effective retrofits Do not damage the ozone In most cases no need for changes in the type of lubricant during the retrofit progressed, matched with traditional and new lubricants No need to replace existing equipment After the retrofit, ISCEON MO59 can be addedBSP; without having to drain the refrigerant in refrigeration Advantages: Has a lower discharge temperature compared to R22; so that tends to prolong the compressor On most systems provide the required cooling capacity Has been proven to save energy on some systems ISCEON MO59 is zero ozone substances (ODS) and, therefore, not subject to the phaseout rules Protocol Montre

Chemours Freon R22Refrigerant is a coolant or fluid used to absorb heat through the phase change from liquid to gas (evaporation) and discharges heat through the phase change from gas to liquid (condensation), so the refrigerant can be said to be a heat transfer in the cooling system.We sell various kinds of refrigerant and we can meet large quantity requirement.ASHRAER-22; A1 Safety ClassificationApplicationsResidential and Commercial A/CMedium- and low-temperature commercial refrigeration:food servicesupermarket display casesfood storage and processingice machinessome transportLubricant RecommendationAB or MO

Chemours Freon MO79ISCEON MO79 very easy to use, is an ozone damaging idak HFC, serves to replace the R22, R502, and HCFC blend a (for example, HP80, HP81, R408A) commercial and industrial equipment for the cooling system expansion directly at low temperature ISCEON MO79 suitable with traditional and new lubricants, in many cases do not need to be doneh than R404A. Used for applications: Commercial and industrial refrigeration equipment expansion directly with low-temperatureHP80, HP81, salnya, R408A) Retrofit easier than R404A and R507 Do not damage the ozone Not included in the list of the phaseout of Montreal Protocol Compatible with lubricating AB, MO and POE In most cases, no need for a change of the type of lubricant No need to replace existing equipment It is not easy terbaka Discharge temperature lower than that of R22, so tend to memperpanjang age of the compressor increase the capacity of coolingeral oil, alkylbenzene and polyol esters, in many cases no need for changes in the type of lubricant during the process of Lubrication takes place is determined by retrofit a number of operating conditions and design, in some systems with complex. piping configuration, POE might need to be added. Small equipment modifications (e.g., seal replacement) or expansion device adjustments or replacement may be required in some applications. The composition of the product (Component Weight%) 

Chemours Freon R404A (HP62) has been the long-standing HFC replacement for R-502 and R-22 in refrigeration applications. HFC-404A is included in the U.S. EPA SNAP de-listing of HFCs that will no longer be acceptable in certain end use applications in the U.S. market. There are no U.S. regulations currently impacting the HFC service market. Refer to the Summary of U.S. EPA SNAP Regulations Pertaining to Refrigerants.ApplicationsCan be used instead of R-404A and R-507 in new system designs for low- and medium-temperature refrigeration. Can also be used for conversion of existing R-404A systems to run or operate on R-407A.

Chemours Freon R404A (HP62) has been the long-standing HFC replacement for R-502 and R-22 in refrigeration applications. HFC-404A is included in the U.S. EPA SNAP de-listing of HFCs that will no longer be acceptable in certain end use applications in the U.S. market. There are no U.S. regulations currently impacting the HFC service market. Refer to the Summary of U.S. EPA SNAP Regulations Pertaining to Refrigerants.ASHRAER-404A; A1 Safety ClassificationReplacesR-502ApplicationsCommercial refrigeration equipmentNew and existing R-502 equipmentBenefitsClose Match for R-502: Works over the entire R-502 operating range.OEMs recommend POE oil for optimum reliability.Phaseout Schedule Consult the specific regulations in your country or region.Lubricant RecommendationPOE

Chemours Freon R134aRefrigerant is a coolant or fluid used to absorb heat through the phase change from liquid to gas (evaporation) and discharges heat through the phase change from gas to liquid (condensation), so the refrigerant can be said to be a heat transfer in the cooling system.We sell Chemours Freon R134a and we can meet the needs on a large scale.ASHRAER-134a; A1 Safety ClassificationReplacesR-12ApplicationsMedium- and high-temperature:stationary commercial refrigerationchiller equipmenthome appliancesRetrofit existing R-12 refrigeration and air conditioning equipment BenefitsBroadly used in commercial and stationary applications.Phaseout ScheduleConsult the specific regulations in your country or region.Lubricant RecommendationPOE for stationary/commercial applications.

Chemours Freon R123Refrigerant is a coolant or fluid used to absorb heat through the phase change from liquid to gas (evaporation) and discharges heat through the phase change from gas to liquid (condensation), so the refrigerant can be said to be a heat transfer in the cooling system.We sell Chemours Freon R123 and can meet the needs of ordering in large quantities.

Refrigerant Gas R.410a410A is the leading HFC refrigerant for replacing R-22 in positive displacement residential and light commercial air-conditioning and heat pump systems. It has higher cooling capacity and significantly higher pressure than R-22 and should be used only in systems specifically designed for R-410A.ASHRAER-410A; A1 Safety ClassificationReplacesR-22ApplicationsNew residential and commercial air conditioning and heat pumps.BenefitsEquipment designed for Freon™ 410A has up to 60% greater capacity than current R-22 equipment.Air conditioning systems with Freon™ 410A can meet or exceed local energy performance guidelines, such as U.S. DOE guidelines for 13 SEER.Phaseout ScheduleConsult the specific regulations in your country or region.Lubricant RecommendationPOE  

Chemours Freon MO99Freon Chemours MO99 (R438A) is the most versatile R22 replacement in the ISCEON product lineCombining the r22-enthalpy pressure characteristics and can use mineral oil, it is a unique HFC that can be used instead of the R22 control temperature at various evaporator temperatures.Instead of R22, ISCEON MO99 can be used in many applications and has advantages over other R22 replacements. ISCEON MO99 has been designed to match the pressure, temperature, enthalpy, and mass flow and properties of R22. ISCEON MO99 has a 42% lower global warming potential (GWP) than R404A.MO99 has a lower discharge temperature that can extend the life of the compressor.Compatible with traditional and new lubricants.MO99 (R438A) is the most versatile R22 replacement in the ISCEON product lineCombining r22-enthalpy pressure characteristics and can use mineral oil, is a unique HFC that can be used instead of R22 at various evaporator temperatures.We sell all kinds of refrigerant of various type